Polyethylene foam, MIRELON^®

MIRELON^® is non-cross linked foam polyethylene with closed cell structure with following properties: Flexibility, Non-absorptivity, Easy processability, Odourless, Chemical resistance, Health and environmental harmlessness.

Pet

hollow foam polyethylene tubes coated with protective PET foil, reinforced with 8x8 mm polyester mat, tubes are NOT slit, reflective PET foil is nonconducting, reflects heat and cold.
For cold-water pipeline insulation ,hot service water pipeline, when pipework must be washable for hygienic reasons and central heating insulation, only pipework with temperature NOT exceeding 90 °C, NOT for outdoor installation (exposed to UV radiation)
6 to 25 mm thick

Tubes

Pro

Hollow foam polyethylene tubes of standard design, slit longitudinally for further separation.
For insulation of existing pipework, cold-water, hot service-water, central heating insulation, only pipework with temperature NOT exceeding 90 °C, NOT for outdoor installation (exposed to UV radiation)
6 to 25 mm thick

Polar

Hollow foam polyethylene tubes coated with protective aluminium foilreinforced with 5x5 mm fibreglass, tubes are NOT slit.
For insulation of refrigeration systems, hot service-water, when pipework must be washable for hygienic reasons, central heating system, only pipework with temperature NOT exceeding 90 °C, NOT for outdoor installation (exposed to UV radiation)
9 to 25 mm thick

Stabil

hollow foam polyethylene tubes coated with protective polyethylene fabric, tubes are NOT slit.
For cold-water pipeline insulation, hot service-water system, central heating, thermal and acoustical insulation of drainage systems, only pipework with temperature NOT exceeding 90 °C, NOT for outdoor installation (exposed to UV radiation)
6 to 25 mm thick

Sheets

Standart design foam PE foils and panels with thickness from 0.5 mm to 80 mm
For surface insulation of concrete flooring, surface insulation under the flooring, circumferential flooring dilatation, outside wall insulation, roofing insulation ,frost-protection foil; protection of recently-cast concrete floors against freezing.
Insulation of storage tanks for water, foodstuffs, chemicals, etc. with max. carrier temperature of +90°C, insulation of large-diameter water and central heating distribution systems, and thermal and acoustical insulation of air-conditioning ductwork.

With reflective PET foil
For behind radiators, under underfloor heating and suitable material for thermal packaging manufacture

With Aluminium Foil
For same applications as standart design

Mirelon from Mirel Trading is the insulation material you need for all your insulation need.